Nilfisk-ALTO 530cc Manuel d'utilisation
Upright vacuum

Form No. 70069A 7/99
Clarke Technology Printed in the U.S.A.
READ THIS BOOK
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your ALTO
machine could result in injury to you or to other personnel; damage to the machine or to other property
could occur as well. You must have training in the operation of this machine before using it. If
operator(s) cannot read English, have this manual explained fully before attempting to operate this
machine.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
For new books write to: ALTO U.S. Inc., 2100 Highway 265, Springdale, Arkansas 72764.
Operating
Instructions
Instrucciones
De Operacion
Instructions
D'Operation
530 / 530cc
Upright
Vacuum
Barredoras
Verticales
Balayeuse
E
Document Outline
- Operating Instructions 530 / 530cc Upright
- Table of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- GROUNDING INSTRUCTIONS
- GENERAL DIAGRAM
- HOW TO ASSEMBLE
- HOW TO USE
- HEIGHT ADJUSTMENT
- HOW TO CHANGE DISPOSABLE PAPER BAG
- HOW TO CLEAN PERMANENT BAG
- HOW TO REPLACE BRUSH ROLL BELT
- HOW TO REPLACE MOTOR
- ALTO® PRODUCT SUPPORT BRANCHES
- CLARKE TECHNOLOGY WARRANTY
- Repair Parts List 530 / 530cc Upright
- Table of Contents
- FINAL TEST FOR PRODUCT SAFETY
- REPLACEMENT PROCEDURES
- TO DISASSEMBLE THE MOTOR
- 530 Upright Vacuum External Parts
- 530 Upright Vacuum Internal Parts
- 530 Upright Vacuum Internal Parts
- 530 Upright Vacuum Motor Assembly
- TROUBLE SHOOTING GUIDE
- 530 Upright Vacuum Wiring Diagram
- 530cc Upright Vacuum Assembly Drawing and Parts List
- ALTO® PRODUCT SUPPORT BRANCHES
- CLARKE TECHNOLOGY WARRANTY