Electrolux EC2830AOW - Manuel (Page 10)

8.1 What to do if...
Problem Possible cause Solution
The appliance does not op-
erate.
The appliance is switched
off.
Switch on the appliance.
The mains plug is not con-
nected to the mains socket
correctly.
Connect the mains plug to
the mains socket correctly.
There is no voltage in the
mains socket.
Connect a different electri-
cal appliance to the mains
socket. Contact a qualified
electrician.
The appliance is noisy. The appliance is not sup-
ported properly.
Check if the appliance
stands stable.
The cushion spacers loca-
ted between the back of the
cabinet and the pipes come
loose.
Put them back in place
again.
Audible or visual alarm is
on.
The cabinet has been re-
cently switched on or the
temperature in the appli-
ance is too high.
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm" and if the prob-
lem still occurs contact a
qualified electrician or con-
tact the nearest Authorized
Service Centre.
Power indicator light is
flashing.
An error has occurred in
measuring the temperature.
Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
The appliance is not work-
ing properly.
Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
The lid doesn't close com-
pletely.
The lid gaskets are dirty or
sticky.
Clean the lid gaskets.
There is excessive frost. Eliminate excess frost.
Food packages are block-
ing the lid.
Arrange the packages in the
right way, see the sticker in
the appliance.
The lid is difficult to open. The lid gaskets are dirty or
sticky.
Clean the lid gaskets.
The valve is blocked. Check the valve.
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp is defective. Refer to "Replacing the
lamp".
www.electrolux.com 10