1 replacing the lamp, 2 closing the door – Electrolux EUF2947GOX Manuel d'utilisation

Page 15

Advertising
background image

Problem

Possible cause

Solution

The appliance has no
power. There is no voltage
in the mains socket.

Connect another electrical
appliance to the mains
socket. Check fuse. Con-
tact a qualified electrician.

No ice.

The ice maker is not
switched on.

Refer to "Ice maker func-
tion".

E1 flashes in the
temperature display

No water supply.

Carry out the necessary
measures on the water
supply. Press any button to
reset the Alarm.

E2 flashes in the
temperature display

The ice channel in the
door is blocked.

Remove the obstacle.
Press any button to reset
the Alarm.

E3 flashes in the
temperature display

The ice maker is defective. Contact service.

E5 flashes in the
temperature display

The ice dispenser is defec-
tive.

Contact service.

The lamp does not
work.

The lamp is defective.

Refer to "Replacing the
lamp".

The door has been open
to long.

Close the door.

Door interferes with
ventilation grill.

The appliance is not level-
led.

Refer to "Levelling".

Misaligned door.

The appliance is not level-
led.

Refer to "Levelling".

DEMO appears on
the Display

The appliance is in dem-
onstration mode (DEMO)

Keep pressed approximate-
ly 10 sec the Mode button
since a long sound of buz-
zer is heard and the Display
shut off for a short while:
appliance start works regu-
larly.

As much as the advice does not lead to result, call the nearest brand-mark service.

6.1 Replacing the lamp

The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Service Cen-
ter .

6.2 Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to
"Installation".

3.

If necessary, replace the defective
door gaskets. Contact the Service
Center.

ENGLISH

15

Advertising