8 extra humidity mode, 9 shoppingmode, 10 door open alarm – Electrolux ERF3867SOX Manuel d'utilisation

Page 28: 11 selecting and dispensing water, 12 lighting, 13 for continuous lighting, 14 switch off the lighting, 15 water filter indicator

Advertising
background image

Mode button until you can see none
of the special icons

The function switches off by se-
lecting a different set temperature.

2.8 Extra Humidity Mode

If you need to increase the humidity in the
refrigerator, we suggest activating the Ex-
tra Humidity function.
To switch on the function:

1.

Press the Mode button until the cor-
responding icon appears.

To switch off the function:

1.

Press the Mode button in order to se-
lect an other function or press the
Mode button until you can see none
of the special icons.

2.9 ShoppingMode

If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the ShoppingMode to chill the products
more rapidly and to avoid warming the
other food which is already in the refriger-
ator.
To switch on the function:

1.

Press the ShoppingMode button.
The ShoppingMode indicator ap-
pears.

The ShoppingMode shuts off automatical-
ly after approximately 6 hours.
To switch off the function before its auto-
matic end:

1.

Press the ShoppingMode button.

2.

The ShoppingMode indicator goes
off.

Alternative method:
To switch on the function:

1.

Press the Mode button until the cor-
responding icon appears.

To switch off the function before its auto-
matic end:

1.

Press the Mode button in order to se-
lect an other function or press the
Mode button until you can see none
of the special icons.

The function switches off by se-
lecting a different fridge set tem-
perature.

2.10 Door open alarm

An acoustic alarm will sound if the door is
left open for a few minutes. The door
open alarm conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored
(door closed), the alarm will stop.
During the alarm, the buzzer can be
switched off by pressing any button.

2.11 Selecting and dispensing
water

• Before dispensing water, select either

Still cold water, Low sparkling water or
High sparkling water.
The actual choice is indicated by the in-
dicator.

• Water is dispensed by pressing a glass

or other container towards the flap.

• Draw back the glass or container to

stop the water flow and the indicator
goes off after a few seconds.

Any water that drips or is spilled is collec-
ted in the drip tray below the water dis-
penser. The drip tray can be detached
and emptied when necessary.

2.12 Lighting

The water dispenser lighting illuminates
automatically when water is dispensed.

2.13 For continuous lighting

1.

Press the Light button and the lighting
goes on.

Brightness is now about 20% until the
dispenser is used.

2.14 Switch off the lighting

1.

Press the Light button and the lighting
goes out.

2.15 Water filter indicator

When the water filter indicator flashes the
water filter has about 20% remaining life-
time.

1.

Press any button to reset the flashing.
In this situation, it is recommended
that you buy a replacement filter.

28 www.electrolux.com

Advertising