Electrolux EOA6841AAX - Manuel (Page 37)

Installing the door and the glass panel
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence.
Make sure that you put the glass panels
back in the correct sequence. The second
panel has a decorative frame. The screen-
printing zone must face the inner side of
the door. Make sure that after the installa-
tion the surface of the glass panel frame
on the screen-printing zones is not rough
when you touch it.
Make sure that you install the middle pan-
el of glass in the seats correctly (refer to
the illustration).
13. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does
not heat up. The appliance is deactiva-
ted. Activate the appliance.
The appliance does
not heat up. The clock is not set. Set the clock.
The appliance does
not heat up. The necessary settings are
not set. Make sure that the settings
are correct.
The appliance does
not heat up. The Child Lock is activated. Refer to "Deactivating the
Child Lock".
The appliance does
not heat up. The fuse is released. Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact an
authorized electrician.
There is water inside
the appliance. There is too much water in
the tank. Deactivate the appliance
and remove the water with a
cloth or sponge.
The steam cooking
does not operate. There is no water in the
tank. Fill the water tank.
The steam cooking
does not operate. Lime obstructs the hole. Check the steam inlet open-
ing. Remove the lime.
ENGLISH 37