American Comfort ACW300C - Manuel (Page 9)

Operation
7
5 6 4 2 1
7 8 9 11 12 13 14 10 15 16
3
MODE
1. Mode (function) option button
2. Timer button
3. ’Temperature up’ button
4. ’Temperature down’ button
5. Speed (ventilation)button
6. ON/OFF (power) button
7. Automatic mode operation
indicator
8. Cooling mode operation
indicator
9. Fan mode operation indicator
10. Timer operation indicator
11. Display window
12. Receiver for remote control
13. Low ventilation indicator
14. High ventilation indicator
15. Compressor operation indicator
16. “Water Full” indicator
Turning ON/OFF
1. Press ON/OFF button, the unit will start automatically. If the ambient temperature is
• Higher than 73.4ºF (23ºC), the unit will work in cooling model.
• Higher than 68ºF (20ºC) but below or equal to 73.4ºF (23ºC), the unit will work in ventilation model.
2. Indicators of the functions in progress come on at the same time.
*NOTE! The display window shows the ambient room temperature from 32ºF (0ºC) to 122ºF (50ºC)
3. To turn the unit off, press ON/OFF button again.
Setting Mode/Function
Press MODE button to select required working mode: automatic, cooling or fan.
The indicator of your selected mode comes on.
Setting Temperature
1. Press ’Temperature Up’ or ’Temperature Down’ button to regulate the temperature you desired.
2. The display window will show the temperature you set as you press ’Temperature Up’ or ’Temperature Down’
button. Otherwise, it will always show the ambient temperature.
3. The pre-setting temperature of this machine is: 75ºF (24ºC) for cooling
Setting Ventilation Speed
1. Press SPEED button to choose the ventilation speed you need, high or low.
The indicator of high or low ventilation will light on at the same time.
2. If the unit is in AUTO mode, it will choose the ventilation speed automatically according to the ambient
temperature (the related indicators will light on), at this time, the speed switch is invalid.
Setting Timer
1. Press TIMER button to set the operating hours you desired (1 to 12 hours, the timer indicator will light on).
When the set time has been reached, the machine will turn off automatically. The display window will show the
hour(s) you set as you press TIMER button. If the timer button is not pressed, the unit will work continuously.
2. By pressing the timer but without turning on the other functions, you can PRE-SET the time for the machine to
work. For example, if you press the timer to ’2’, the unit will work automatically after 2 hours.