Aiwa VX-S207U - Manuel (Page 5)

ENGLISH
Connecting the antenna
Basic connections
PREPARATION
2
1
4
75-ohm
coaxial cable
(not supplied)
300-ohm twin-lead cable
(not supplied)
Antenna adaptor
(supplied)
1
2
To AC outlet
Connect the antenna cable to the UHF/VHF connector on the unit.
If the cable is a round-type 75-ohm coaxial cable, connect it directly to the UHF/VHF connector.
If the cable is a flat-type 300-ohm twin-lead cable, connect it to the antenna adaptor (supplied), and connect the adaptor to
the UHF/VHF connector.
When you use VX-S137U, the antenna adaptor can be taken out from the supplied telescopic antenna.
Connect the AC cord to the AC wall outlet after passing it through the AC cord hook.
To use the security hook for safety (VX-S207 only)
To prevent the unit from falling during earthquakes, etc., affix the unit to a wall or pillar with the security hook on the rear using
the strong twine or wire.
AC cord hook
Security hook
CONTINUE
o
UHF/
VHF
UHF/
VHF
VX-S207
VX-S207