Aiwa VX-S207U - Manuel (Page 13)

ENGLISH
1
2
3
4
5
6
7
Checking the channel set-up
to use VCR Plus+® system
To set the timer using VCR Plus+® system, you have to
check whether the VCR channel numbers match the guide
channels which are assigned to the TV stations.
If they do not match, the VCR Plus+® system does not
function correctly. In this case, coordinate the number.
For example
For each channel your unit receives, use the channel line up
chart to check that the channel numbers match. For
example, SHOWTIME is listed in the channel line up chart
(under the VCR Plus+ Channel Number) as channel 38,
your unit receives SHOWTIME on channel 14, you need to
coordinate these numbers by locating guide channel 38
(under GUIDE CH). Next enter your SHOWTIME channel 14
(under VCR CH).
Continue this process until all channels match.
Sample Channel Line Up Chart
WCBS New York CBS 02 02
WNBC New York NBC 04 04
WNYW New York NYW 05 05
WABC New York ABC 07 07
A&E Arts & Entertainment 39 44
BET Black Entertainment 57 23
CNBC Consumer News & Business 23 16
CSPAN Government Business 28 54
DSC Discovery Channel 37 63
DIS Disney Channel 53 27
MAX Cinemax 45 15
SHO Showtime 38 14
USA USA Network 44 40
• Channel Guide listings are available in your local TV Guide
and Newspaper.
VCR Plus+
Channel Number Local Cable Company
Channel Number TV Station
Before starting
Set the TV VCR/CATV selector to TV VCR.
Press MENU.
Press SET/TRACKING + or – to select CH SET-
UP, then press ENTER.
Press SET/TRACKING + or – to select GUIDE
CH SET, then press ENTER.
Press SET/TRACKING +, – or the number
buttons to select GUIDE CH “38,” then press
ENTER.
When selecting the number between 10 and 19 using
the number buttons, press 0 once to enter the hundreds
digit, and then press the buttons 1 through 9 to enter
tens and ones digits.
When selecting the numbers less than 10 using the
number buttons, press 0 twice to enter the hundreds and
tens digits, and then press the buttons 1 through 9 to
enter the ones digit.
Press SET/TRACKING+, – or the number
buttons to display VCR CH “14,” then press
ENTER.
When you use the number buttons, select the number in
the same way as in step 4.
Repeat steps 4 and 5 until all necessary
channel numbers are set.
Press MENU 3 times to return to the normal
screen.
Tip
To cancel the VCR CH setting, press CANCEL in step 5.
ENTER MENU
CANCEL
TV VCR/CATV
Number
buttons
SET/TRACKING
+/–
12