Reese 59718 ROOF RACK - Manuel (Page 2)

BMW X5 2007 - 2010
with Side Rails
5. As you push the Bottom Strap upward, introduce the Star Head
Bolt through the End Support & Straps. Using the T-Handle wrench
provided, fasten the Straps together - ensuring they are fixed in the
correct positions along the side rail as specified in (Fig. 5) on the first
page. Gradually tighten bolts alternatively ensuring Straps are
properly engaged, until even tensioning is achieved.
6. Re-Install the locking covers: there are two
designated channels on the End Supports into which the
cover ribs locate.(Fig. 6). Insert the Cover into the End
Support by sliding it through the channels until they
positively engage. Then re-lock the covers to fasten.
Ensure bars are parallel and straps are tightened against the
side rails. Perform a check by tugging on the cross bars.
REGULARLY CHECK THE TIGHTNESS OF LOCKING
STRAPS.
Loads should be evenly distributed and secured .
Any weight carried on the vehicle will adversely affect its handling particularly in cornering or in a cross wind and the vehicle should
therefore be driven with increased caution. Check the function of all doors and sunroof before driving. For lost key replacement or
other service items call customer service: 1-800-632-3290 or visit:
www.rolaproducts.com
Please have lock core number or part numbers available.
A number of accessories for carrying special loads are available. Only use NON-STRETCH tie down straps.
TIP: Ensure the covers are locked into place
on the
End Support when you store your
roof-racks away.
Pg 2 of 2
RBXL
GENERAL USAGE INFORMATION
FITTING INSTRUCTIONS
Fig. 5
push
push
Printed in China
Fig. 6
Fig. 7
7. Place the instructions in your vehicles glove box (Fig. 7)
for future installation reference and service information.
59718N Rev 11-30-11