Reese 44129 PROFESSIONAL RECEIVER Manuel d'utilisation

Installation instructions, Ford freestar mercury monterey, Part numbers

Advertising
background image

Installation Instructions

Ford Freestar

Mercury Monterey

Part Numbers:

44129

75158

87107

Hitch Shown In Proper Position

Equipment Required: Fishwire (Provided),

Exhaust Hanger Stretcher

Wrenches: 3/4

Drill Bits: 1/2”

Drilled hole

1. Remove exhaust pipe from exhaust hanger.
2. Fishwire the frame side mounting blocks and carriage bolts through access slots in bottom of frame rails.
3. Raise hitch into position and install conicals and hex nuts.
4. Using the hitch as a template drill one 1/2" hole in bottom side of frame rail (passenger side only).
5. Fishwire the remaining block and carriage bolt through access slots in bottom of frame rails.
6. Re-connect exhaust pipe to exhaust hanger.

Rev. B

6-23-06

N75158

Sheet 1 of 2

z

2004, 2006 Cequent Towing Products

Conical Washer 1/2

Qty. (4)

4

Lock Washer 1/2

Qty. (1)

7

Block .25 X 1.50 X 2.00

Qty. (2)

3

Block .25 X 1.00 X 3.00

Qty. (1)

6

Block .25 X 2.00 X 2.00

Qty. (2)

2

Hex Nut 1/2-13

Qty. (5)

5

Carriage Bolt 1/2-13 X 1.75

Qty. (5)

1

Tighten all 1/2 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: F75158

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

350 (159 Kg)

3500 (1589 Kg)

Weight Carrying

Ball Mount

500 (227 Kg)

5000 (2270 Kg)

Weight Distributing

Max Tongue

WT (LB)

Max Gross

Trailer WT (LB)

Hitch type

Wiring Access Location : SUV1, SUV2

Frame rail

Access slot

Typical both sides

Fascia

2

1

6

1

3

1

5

4

5

4

5

7

Form: F205 Rev A 5-6-05

Advertising