Pg 2 of 2, Fig 6 fig 7 – Reese 59817 ROOF RACK Manuel d'utilisation

Page 2

Advertising
background image

LEXUS RX 350 2010 - On
with Side Rails

5. As you push the Bottom Strap upward, introduce the Star Head
Bolt through the End Support & Straps. Using the T-Handle wrench
provided, fasten the Straps together - ensuring they are fixed in the
correct positions along the side rail as specified in (Fig. 4) on the first
page. Gradually tighten bolts alternatively ensuring Straps are
properly engaged, until even tensioning is achieved.

6. Re-Install the locking covers: there are two
designated channels on the End Supports into which the
cover ribs locate.(Fig 6). Insert the Cover into the End
Support by sliding it through the channels until they
positively engage. Then re-lock the covers to fasten.

Ensure bars are parallel and straps are tightened against the
side rails. Perform a check by tugging on the cross bars.

REGULARLY CHECK THE TIGHTNESS OF LOCKING

STRAPS.

Loads should be evenly distributed and secured

.

Any weight carried on the vehicle will adversely affect its handling particularly in cornering or in a cross wind and the vehicle should
therefore be driven with increased caution. Check the function of all doors and sunroof before driving. For lost key replacement or
other service items call customer service: 1-800-632-3290 or visit:

www.rolaproducts.com

Please have lock core number or part numbers available.

A number of accessories for carrying special loads are available. Only use NON-STRETCH tie down straps.

TIP: Ensure the covers are locked into place
on the

End Support when you store your roof-

racks away

Pg 2 of 2

Vehicle Roof

RBXL

GENERAL USAGE INFORMATION

FITTING INSTRUCTIONS

Fig 5

push

push

Printed in China

Fig 6

Fig 7

7. Place the instructions in your vehicles glove box for
future installation reference and service information.

59817N Rev 5/13/11

Advertising