Aiwa VX-C131U - Manuel (Page 5)

ENGLISH
Connecting the antenna
Basic connections
PREPARATION
2
1
4
75-ohm
coaxial cable
(not supplied)
300-ohm twin-lead cable
(not supplied)
Antenna adaptor
(supplied)
1
2
To AC outlet
Connect the antenna cable to the VHF/UHF connector on the unit.
If the cable is a round-type 75-ohm coaxial cable, connect it directly to the VHF/UHF connector.
If the cable is a flat-type 300-ohm twin-lead cable, connect it to the antenna adaptor (supplied), and connect the adaptor to
the VHF/UHF connector.
The antenna adaptor can be taken out from the supplied telescopic antenna.
Connect the AC cord to the AC wall outlet after passing it through the AC cord hook.
To connect the supplied telescopic antenna
AC cord hook
Antenna adaptor
(supplied)
CONTINUE
o
AUDIO VIDEO
OUT
IN
R L
(MONO)
VHF/
UHF
AUDIO VIDEO
OUT
IN
VHF/
UHF
Mount the supplied antenna in the antenna holder.
Extend and adjust the ends of the antenna to get the best signal reception.
Note
For better reception, especially in outlying areas, or where ghosting or interference is a problem, use an external room-mounted
antenna.