Aiwa VX-C131U - Manuel (Page 23)

ENGLISH
Playing back the portion you just
recorded – One-Touch Playback
Using One-Touch Playback after VCR Plus+® system (page
24) or manual timer recording (page 25) is convenient. You
can make timer recordings and play back only the portion
you just recorded with the timer by pressing a single button
later.
Stop recording (when recording without timer).
The ONE-TOUCH PLAYBACK button on the unit lights.
If another operation button is pressed after you stop
recording, One-Touch Playback will be canceled and the
ONE-TOUCH PLAYBACK button on the unit lights off.
Press ONE-TOUCH PLAYBACK on the unit or OTPB
on the remote control.
The tape rewinds to the start of the recorded portion and
begins playback.
When you set the timer for more than two
timer programs
The unit starts playing back from the earliest one when you
use One-Touch Playback.
To find the beginning of the second (or later) program, use
Index Search.
Note
One-Touch Playback does not work for recordings of less than
1 minute.
1
2
3
Adhesive tape
Erasure prevention tab
4
Press CHANNEL N or M repeatedly, or the
number buttons to select the channel number
to record.
To select CATV broadcast using the number buttons
Set the TV VCR/CATV selector to CATV. When
selecting the number between 10 and 19, press 0 once
to enter the hundreds digit, and then press the buttons 1
through 9 to enter tens and ones digits. When selecting
the numbers less than 10, press 0 twice to enter the
hundreds and tens digits, and then press the buttons 1
through 9 to enter the ones digit.
To select VHF/UHF broadcast using the number buttons
When selecting the numbers less than 10, press 0 to
enter the tens digits, and then press the buttons 1
through 9 to enter the ones digit.
Press w REC/OTR to start recording.
• “INDEX” flashes for a few seconds.
• The REC/OTR indicator on the unit lights.
To stop recording
Press s STOP on the remote control or Z STOP/
EJECT on the unit.
The
w REC/OTR button on the unit lights off.
To pause recording
Press a PAUSE/STILL.
The w REC/OTR button on the unit flashes.
To resume recording, press a PAUSE/STILL or w REC/
OTR.
To prevent an accidental recording
Break off the erasure prevention tab on the back edge of the
cassette.
To record over the tape again, cover the gap with adhesive
tape.
Tip
If you want to record the program through the line input, press
CHANNEL
N or M , or TV/LINE to display “LINE1” (from the
AUDIO/VIDEO IN jacks on the rear) or “LINE2” (from the
AUDIO/VIDEO IN jacks on the front) in step 3.
Notes
• The channel cannot be changed during recording.
• If you try to record on a cassette without its erasure
prevention tab, the unit will eject the cassette.
• If recording pause lasts for more than 5 minutes, the unit will
automatically enter stop mode to protect the tape.
• If the power is turned off during recording, the TV turns off,
but the VCR continues to record.
22