Activeforever Invacare Bariatric Trapeze (Bariatric Trapeze) - Manuel (Page 3)

Part No 1106663 3 Bariatric Trapeze
Adjusting the Trapeze
ƽ WARNING
Ensure that the trapeze clamp is securely tightened BEFORE using the trapeze,
otherwise injury may occur.
NOTE: For this procedure, refer to FIGURE 2.
Height
1. Position the desired chain link onto the free ʺSʺ hook on the trapeze clamp (Detail ʺAʺ).
Position
1. Loosen trapeze knob by turning counterclockwise (Detail ʺAʺ).
2. Slide the clamp to desired position on the boom tube.
3. Secure the trapeze clamp to the boom tube by turning the knob clockwise.
Rotation
NOTE: The mast and boom tube can be rotated to three positions.
1. To adjust the rotation, pull out the quick release pin (Detail ʺBʺ).
2. Move the trapeze to the desired position. There are three (3) holes to choose from as
shown in Detail ʺCʺ.
3. Let go of the quick release pin once the trapeze is in the desired position. You should
hear an audible ʺclickʺ as the quick release pin enters one of the three (3) holes and
locks into place.
ƽ WARNING
Ensure that the quick release pin is securely locked in place BEFORE using the
trapeze, otherwise injury may occur.
FIGURE 2 Adjusting the Trapeze
Boom Tube
Base
Assemblies
A-Frame
Trapeze
Clamp
Mast
Trapeze
Knob
Chain
Links
Free
“S”
Hook
Grab
Bar
Quick
Release
Pin
Three Options for
Trapeze Rotation
A-Frame without Mast
DETAIL
“C”
NOTE: Adjustment holes are not visible
when Trapeze is fully assembled.
DETAIL “B”
DETAIL
“A”