Iiyama ProLite PB1705S - Manuel (Page 21)

ENGLISH
SCREEN ADJUSTMENTS
 The screen adjustments described in this manual are designed to set image position and minimize
fl icker or blur for the particular computer in use.
 The monitor is designed to provide the best performance at resolution of 1280 × 1024, but can not
provide the best at resolutions of less than 1280 × 1024 because the picture is automatically stretched
to fi t the full screen. It is recommended to operate at resolution of 1280 × 1024 in normal use.
 Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
 It is preferable to adjust the image position and frequency with the monitor controls, rather than the
computer software or utilities.
 Perform adjustments after a warm-up period of at least thirty minutes.
 Additional adjustments may be required after the Auto Image Adjust depending on the resolution or
signal timing.
 The Auto Image Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Horizontal
Size and Fine Tune. The other way is performing each adjustment manually.
Perform the Auto Image Adjust fi rst when the monitor is connected to a new computer, or resolution
is changed. If the screen has a flicker or blur, or the picture does not fit in the display area after
performing the Auto Image Adjust, manual adjustments are required. Both adjustments should be
made by using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA website (http://www.
iiyama.com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows 95/98/2000/Me/XP/Vista/7.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
NOTE  Consult the appropriate documentation for doing this.
 Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in the
wallpaper setting dialogue box. If you use Microsoft ® PLUS! 95/98 cancel the setting of
“Stretch desktop wallpaper to fi t the screen”.
[Adjustment pattern]
Zebra pattern
Color bar
Picture frame
NOTE
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
OPERATING THE MONITOR 16