Iiyama ProLite PB1705S - Manuel (Page 16)

ENGLISH
11 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 26. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 16 for SCREEN ADJUSTMENTS.
Press the 1 Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the / Buttons.
B Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the 2 Button. Then, use the / Buttons to highlight the
desired adjustment icon.
C Press the 2 Button again. Use the / Buttons to make the appropriate
adjustment or setting.
Adjustments for H. / V. Position, Horizontal Size and Fine Tune are saved for each signal timing.
Except for these adjustments, all other adjustments have only one setting which applies to all signal
timings.
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Timeout has passed. Also, the 1 button can be used to return previous menu
and turn off the On-Screen Display.

NOTE

For example, to correct for vertical position, select Menu item of Manual Image Adjust and then
press the 2 Button. Then, select (H./V.Position) by using the / Buttons.
An adjustment page appears after you press the 2 Button. Then, use the / Buttons to
change the vertical position settings. The vertical position of the overall display should be changing
accordingly while you are doing this.
 Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
Main Menu
Auto Image Adjust
Contrast/Brightness
Input Select
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Memory Recall
Exit Select
Analog
Main Menu
Auto Image Adjust
Contrast/Brightness
Input Select
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Memory Recall
Exit Select Exit Select
Manual Image Adjust
Horizontal Size
H./V. Position
Fine Tune
Sharpness
Analog
H./V. Position
V. Position
H. Position
Exit Select