Velodyne Acoustics DLS-4000R - Manuel (Page 11)

10
10
from the subwoofer to the main speakers in your system. This control
should be set to achieve similar volume level from between both the
main speakers and subwoofer. When pressing volume up or down,
the speed at which the power light blinks indicates subwoofer volume
- the faster the blinking, the louder the unit plays.
Note: The volume can also be adjusted via the buttons on the back
panel of the subwoofer. These buttons have the same effect as
pressing the up and down volume buttons on your remote.
PRESETS - There are 4 presets, consisting of Movies, R&B – Rock,
Jazz – Classical, and Games. As a preset is chosen, the light flashes
the corresponding number of times. The presets provide the following
characteristics for bass reproduction:
Movies: Maximum output and impact for explosions
and other action adventure movie content.
R&B – Rock: Provides the driving bass found in today’s
rock music.
PHASE - These buttons allow you to optimize the subwoofer
performance for the location and your listening position. Select the
switch position at which you hear the most bass. The light will blink
according to the following schedule:
0 degrees 1 blink
90 degrees 2 blinks
180 degrees 3 blinks
270 degrees 4 blinks
LIGHT - If you wish, you can deactivate the blue front panel lights on
your DLS-R unit. To do this, press the LIGHT button on your remote.
The light will turn off. To reactivate the light, press the LIGHT button
again.
NIGHT - Night mode limits the maximum output of the subwoofer for
later night listening or to be more considerate of close neighbors.
Press the night button to turn the night mode feature on or off. Night
mode, when active, is indicated by the reduced intensity of the light.
VOLUME Control - This control allows you to balance the output
Utilisation
Cette section traite de l’utilisation courante de votre caisson
d’extrêmes graves DLS-R.
Télécommande
La figure 2 montre la télécommande qui vous permet de choisir le
mode d’écoute que vous désirez.
Figure 2. Affichage à distance
POWER (alimentation) - Ce bouton force votre appareil DLS-R à
passer au mode d’attente. Le caisson d’extrêmes graves ne jouera
pas et la DÉL s’éteindra. L’appareil restera à ce mode jusqu’à ce que
le bouton POWER soit enfoncé de nouveau. Pour bien désactiver (c.-
à-d., couper l’alimentation), mettre l’interrupteur marche-arrêt à arrêt
sur le panneau arrière.
MUTE (silencieux) - Ce bouton assourdit le caisson d’extrêmes
graves. Le voyant sur le caisson d’extrêmes graves clignote