Teac Gf-680 - Manuel (Page 18)

18
Programmed Playback
1
3
6
5
2
4
Up to 20 tracks from 3 discs can be programmed in the desired
order.
Shuffle, Repeat and Intro check functions don’t work during
programmed playback.
Press the CD button or the FUNCTION button to select "CD". 1
Press the PROGRAM button. 2
"TRACK", "MEMORY", and the current disc number blinks on the
display.
< To cancel the program mode, press the STOP button.
< When no button is pressed for 10 seconds, the program mode
will be cancelled.
If you want to select another disc, press the corresponding
button or the DISC SKIP button. 3
Tap up or down the SKIP knob repeatedly to select a track. 4
Press the PROGRAM button. 5
The track is programmed, and "P-02" is displayed.
< Repeat step to to program more tracks.
< You can program up to 20 tracks.
When the selection of track numbers is completed, press the
PLAY/PAUSE button to start program playback. 6
5 3
< If the PLAY/PAUSE button isn't pressed within 10 seconds, the
MEMORY indicator will go off. In that case, press the
PROGRAM button and then press the PLAY/PAUSE button to
start program playback.
< When the playback of all the programmed tracks has finished,
or if one of the following buttons is pressed, the MEMORY
indicator will go off and the program mode will be cancelled:
STOP, FUNCTION (TAPE, AUX/PHONO, TUNER), POWER
DISC SKIP, DISC 1,2,3
But the programmed contents aren't lost. You can return to the
programmed playback by pressing the PROGRAM button and
the PLAY button. (If another source was selected, press the CD
button beforehand.)