National Geographic Indoor Thermometer with Digital Photo Frame 327nc - Manuel (Page 5)

5
8.0 Weather Forcast Icon
The weather forcast icon is based on the humidity reading.
9.0 Changing the Battery
NOTE: the SR44 battery is only necessary for the weather and clock functions.
1. Using a flat object, such as a screwdriver or coin, remove the battery compartment
on the back of the unit by pushing outwards on the cover.
2. Replace the battery with a new SR44, with the + side facing up.
3. Replace the battery cover.
10.0 Connecting the Photo Frame to PC
Support System: Windows 2000, XP, Vista
NOTE: When using the Digital Photo Frame for the first time, it is recommended to
charge the unit for 6-8 hours before first use. To charge the unit, plug the USB cable
to your computer and then to the Digital Photo Frame. Once fully charged the Digital
Photo Frame will stay on for approximately 8 hours before the battery needs to be
recharged again.
1. Once the USB is connected to the PC and to the unit, press the MENU button once.
A menu will appear on the screen of the photo frame.
2. “USB Connect” will be highlighted, press the MENU button to confirm.
3. Press MENU button to select “YES”. The screen will then show “USB Connect”.
4. The DPFMate Software window should automatically open on the PC.
NOTE: If the software does not open automatically, go into “My Computer” and the
software will be in the “Devices with Removable Storage” section. Double click on the
software to open it.
NOTE: The unit must always be plugged into the PC via the USB cable to be able to
open the software.
20%RH to
40%RH
41%RH to
65%RH
66%RH to
75%RH
76%RH to
90%RH
or