National Geographic Indoor Thermometer with Digital Photo Frame 327nc - Manuel (Page 4)

4
4.0 Date and Time Setup
1. Press and hold the Date/Time button until “12Hr” begins to flash.
2. Press the Set/Day button to toggle between 12Hr and 24Hr.
3. Press the Date/Time button to confirm.
4. Next the seconds will begin to flash. Press the Set/Day button to reset the seconds
to zero. Press the Date/Time button to confirm.
5. The hour digits will begin to flash. Follow steps 2-3 to set the hour digits, minute
digits, year, month and date.
NOTE: Press the Set/Day button to display the seconds or day of the week.
5.0 Setting the Alarm Time
1. Press the Alarm button to display the alarm
time.
2. Press and hold the Alarm button until the
hour digits begin to flash.
3. Press the Set/Day button to toggle to the
correct hour.
4. Press the Alarm button to confirm.
5. The minute digits will start to flash. Press
the Set/Day button to toggle to the correct minutes.
6. Press the Set/Day button to confirm.
7. Once the alarm time has been set, an alarm icon will be displayed above the
seconds.
8. To turn off the alarm, press the Set/Day button in alarm mode, the alarm icon should
no longer be displayed above the seconds. To turn on the alarm press the Set/
Day button again.
9. When the alarm sounds, press the Date/Time button to stop the audible alarm, or
press the SNZ button and the alarm will sound again after 8 minutes. If no button is
pressed the alarm will sound for 30 seconds and then turn off.
6.0 °C/°F Switchable
Press the °C/°F button to toggle between Celsius and Fahrenheit.
7.0 Indoor Temperature / Relative Humidity Trend Arrows
The trend arrows indicate the trend of the temperature and relative humidity.
Up arrow – Indicates the temperature or humidity is increasing
Steady arrow – Indicates the temperature or humidity is steady
Down arrow – Indicates the temperature or humidity is decreasing