Using the equalizer 35, Recalling equalizer curves 35, Adjusting equalizer curves 35 – Pioneer DEH-P5800MP Manuel d'utilisation

Page 35: Using the equalizer, Audio adjustments, Recalling equalizer curves, Adjusting equalizer curves

Advertising
background image

# When the rear output setting is
REAR SP :S/W, you cannot adjust front/rear
speaker balance. Refer to Setting the rear output
and subwoofer controller on page 41.

3 Press c or d to adjust left/right speaker

balance.

When you press c or d, Bal L/R 0 is dis-

played. Each press of c or d moves the left/

right speaker balance towards the left or the

right.

Bal L 9  Bal R 9 is displayed as the left/right

speaker balance moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization

to match car interior acoustic characteristics

as desired.

Recalling equalizer curves

There are six stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Display

Equalizer curve

Super Bass

Super bass

Powerful

Powerful

Natural

Natural

Vocal

Vocal

Custom

Custom

Flat

Flat

! Custom is an adjusted equalizer curve that

you create.

! A separate Custom curve can be created

for each source. (The built-in CD player and

the multi-CD player are set to the same

equalizer adjustment setting automati-

cally.) If you make adjustments, the equali-

zer curve settings will be memorized in

Custom.

! When Flat is selected no supplement or

correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

Flat and a set equalizer curve.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

PowerfulNaturalVocalCustomFlat

Super Bass

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in Custom.

1 Press AUDIO to select EQ.

Press AUDIO until EQ appears in the display.

2 Press c or d to select the equalizer

band to adjust.

Each press of c or d selects equalizer bands

in the following order:

EQ LOW (low)EQ MID (mid)EQ HIGH

(high)

3 Press a or b to adjust the level of the

equalizer band.

Each press of a or b increases or decreases

the level of the equalization band.

+6  6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust
the level.

Note

If you make adjustments, Custom curve is up-
dated.

Audio Adjustments

En

35

English

Section

08

Advertising