Creating a playlist with its, Programming 29, Scanning cds and tracks – Pioneer DEH-P5800MP Manuel d'utilisation

Page 29: Pausing cd playback, Using its playlists, Multi-cd player

Advertising
background image

Scanning CDs and tracks

While you are using DISC, the beginning of

each track on the selected disc plays for about

10 seconds. When you are using MCD, the be-

ginning of the first track of each disc is played

for about 10 seconds.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2 Press FUNCTION to select Scan.

Press FUNCTION until Scan appears in the

display.

3 Press a to turn scan play on.

Scan : ON appears in the display. The first 10

seconds of each track of the current disc (or

the first track of each disc) is played.

4 When you find the desired track (or

disc) press b to turn scan play off.

Scan :OFF appears in the display. The track (or

disc) will continue to play.

# If the display has automatically returned to
the playback display, select Scan again by press-
ing FUNCTION.

Note

After track or disc scanning is finished, normal
playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of

the CD.

1 Press FUNCTION to select Pause.

Press FUNCTION until Pause appears in the

display.

2 Press a to turn pause on.

Pause : ON appears in the display. Play of the

current track pauses.

3 Press b to turn pause off.

Pause :OFF appears in the display. Play will re-

sume at the same point that you turned pause

on.

Using ITS playlists

ITS (instant track selection) lets you make a

playlist of favorite tracks from those in the

multi-CD player magazine. After you have

added your favorite tracks to the playlist you

can turn on ITS play and play just those selec-

tions.

Creating a playlist with ITS

programming

You can use ITS to enter and play back up to

99 tracks per disc from up to 100 discs (with

the disc titles). (With multi-CD players sold be-

fore the CDX-P1250 and CDX-P650, up to 24

tracks can be stored in the playlist.)

1 Play a CD that you want to program.

Press a or b to select the CD.

2 Press FUNCTION and hold until TITLE

appears in the display, then press

FUNCTION to select ITS.

After TITLE is displayed, press FUNCTION re-

peatedly, the following functions appear in the

display:

TITLE (disc title input)ITS (ITS program-

ming)

3 Select the desired track by pressing c

or d.

Multi-CD Player

En

29

English

Section

07

Advertising