Pioneer DEH-P960MP - Manuel (Page 25)

Playing MP3/WMA/WAV
1 2 3
4 5
These are the basic steps necessary to play an
MP3/WMA/WAV with your built-in CD player.
More advanced MP3/WMA/WAV operation is
explained starting on page 27.
1 MP3/WMA/WAV indicator
Shows when the MP3/WMA/WAV file is
playing.
2 Folder number indicator
Shows the number of folder currently play-
ing.
3 Track number indicator
Shows the track (file) currently playing.
4 Bit rate/sampling frequency indicator
Shows the bit rate or sampling frequency of
the current track (file).
5 Play time indicator
Shows the elapsed playing time of the cur-
rent track (file).
1 Press EJECT.
CD loading slot appears.
# After a CD-ROMhas been inserted, press
SOURCE to select the built-in CD player.
2 Insert a CD-ROMinto the CD loading
slot.
Playback will automatically start.
CD loading slot
EJECT button
# You can eject a CD-ROMby pressing EJECT.
# If the front panel is in the eject position
(shown above), buttons other than EJECT,
VOLUME, OPEN, and ATT (on the remote con-
trol) do not operate.
3 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
4 Press a or b to select a folder.
# You cannot select a folder that does not have
an MP3/WMA/WAV file recorded in it.
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
5 To perform fast forward or reverse,
press and hold c or d.
# This is fast forward and reverse operation only
for the file being played. This operation is can-
celed when the previous or next file is reached.
# If you select Rough search, pressing and
holding c or d enables you to search every 10
tracks in the current folder. (Refer to Selecting the
search method on page 28.)
6 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
MP3/WMA/WAV Player
En
25
English
Section
06