Selecting the video for the display independently, Basic operation – Pioneer AVD-W6000 Manuel d'utilisation

Page 14

Advertising
background image

13

Selecting the Video for the Display Independently

1. Set so that only the display video can be selected.

Hold for 2 seconds

2. Press V.SEL button.

Each press of the V.SEL button selects the desired video source in the following order:
[VCR1]

= [VCR2] = [RGB] = Exit to [VCR1]

Note:

• Return to the setting for switching all source at the same time, press the V.SEL button for 2 seconds.
• If you press the V.SEL button when video source are switched with the SEL/POWER button,

[SELECTOR] appears in red on the screen, indicating that the audio and video can be switched
simultaneously using the SELECTOR button.

• While switched to forced video from a back-up camera, if you try to select a video source with the

V.SEL button, “INVALID” is displayed, indicating that you cannot switch the video source.

Selecting the Audio for Built-in Speaker Independently

1. Set so that only the built-in speaker audio can be switched.

Hold for 2 seconds

2. Press SP.SEL button.

Each press of the SP.SEL button selects the desired audio source in the following order:
[VCR1]

= [VCR2] = [RGB] = Exit to [VCR1]

Note:

• Return to the setting for selecting all source at the same time, press the SP.SEL button for 2 sec-

onds.

• If you press the SP.SEL button when audio are switched with the SEL/POWER button, [SELEC-

TOR] appears in red on the screen, indicating that the audio and video can be switched simultane-
ously using the SELECTOR button.

VO L

1 2

VCR 1
VCR 1

VO L

1 2

VCR 1
VCR 1

Basic Operation

Advertising