About the rca video and audio outputs of this unit, Selecting the audio, video, and external, Output – Pioneer AVD-W6000 Manuel d'utilisation

Page 13: Caution, Selecting the audio, video, and external output

Advertising
background image

About the RCA Video and Audio Outputs of this Unit

When you connect a separate piece of AV equipment such as a second display to the RCA
video and audio output jacks of the hide-away unit, you can select the source for output
with the SEL/POWER button,
• The video and audio source of the RCA outputs of this unit cannot be selected indepen-

dently.

• The V.SEL, SP.SEL and Volume control buttons will have no effect even if operated.

CAUTION

Never position the display connected to the RCA output jack of the hide-
away unit, driver can view the picture while the vehicle is moving.

Selecting the Audio, Video, and External Output

When three icons are displayed in a line, you can simultaneously change the sources of
each icon.
If Display and Built-in speaker are set for independent switching, switch them simultane-
ously. (Refer to pages 11 and 13.)

• Select the desired source.

Each press changes the source ...

Each press of the SEL/POWER button selects the desired source in the following order:
[VCR1]

= [VCR2] = [RGB] = Exit to [VCR1]

Note:

• [RGB] indicates the equipment connected to the hide-away unit’s RGB input. (The source does not

switch to [RGB] when nothing is connected to the RGB input.)

• [VCR1] and [VCR2] are audio and video from the AV equipment connected to the VCR1 or VCR2

input terminal. (Refer to page 27.)

• Verify the correct connection with the AV equipment connected to VCR1 or VCR2.
• VCR2 is selectable only if either [VIDEO] or [S-VIDEO] has been chosen in [INPUT SETTING] .

(Refer to page 19.)

VCR 1

VO L

1 2

12

ENGLISH

ESPA

Ñ

OL

DEUTSCH

FRAN

Ç

AIS

ITALIANO

NEDERLANDS

Advertising