Enjoying sound effects from all speakers – Panasonic SC-XH50 Manuel d'utilisation

Page 11

Advertising
background image

11

RQ

TX13

26

Getting S

tarted

Playing

Discs

Ot

her Op

era

tions

Reference

≥ The following sound effects may not be available or may have no effect

with some sources.

≥ You may experience a reduction in sound quality when these sound

effects are used with some sources. If this occurs, turn the sound effects
off.

When changing the surround sound effect, Whisper-mode Surround or the
sound modes, the setting is displayed on the TV screen if “DVD/CD” is the
selected source during video playback.

For “Front layout (Alternative)”

§

mode

STANDARD:
Stereo source is output as 2.1-channel audio.

When playing surround sources, you can enjoy 5.1-channel

surround-like effect even with all the speakers at the front.

STEREO:
You can play any source in stereo. Surround sound effect is

unavailable.

A.SRD (Advanced Surround):
You can enjoy surround effect with any audio source.

When the signal is Dolby Digital, “/DOLBY DIGITAL” will also be displayed.

§ Selected mode in “Speaker layout” (B 8, Easy setup).

You can enhance the audio effect for low volume 5.1-channel sound.
(Convenient for late night viewing.)

Press [W.SRD]F.

Each time you press the button:
ON

,------. OFF

Only when “Surround layout (Recommended)” mode is selected in
“Speaker layout” (
B 8, Easy setup)
(Effective when playing 5.1-channel sound or when DOLBY PLII/“S.SRD”
(B left) is selected.)

For “Surround layout (Recommended)”

§

mode:

Front speaker balance

For “Front layout (Alternative)”

§

mode:

Front and surround speaker balance

§ Selected mode in “Speaker layout” (B 8, Easy setup).

Enjoying sound effects from all

speakers

Enjoying surround sound effects

Press [SURROUND];.

Each time you press the button:
For “Surround layout (Recommended)”

§

mode

STANDARD:
Sound is output as it was recorded/encoded. Speaker output varies

depending on the source.

MULTI-CH:

You can enjoy sound from the front speakers, as well as the surround

speakers even when playing a 2-channel sound.

MANUAL: (B below)

While “MANUAL” is displayed, press [2, 1]8 to select

other surround modes.

Each time you press [2, 1]8:

DOLBY PLII MOVIE
Suitable for movies, or videos recorded in Dolby Surround.
DOLBY PLII MUSIC
Adds 5.1-channel effects to stereo sources.
S.SRD (Super Surround)
You can enjoy sound from all speakers with stereo sources.

STEREO
Sound will only be output to the front speakers and the subwoofer from

any source.

Recommended modes to enjoy TV audio or stereo

sources from all speakers:

≥ DOLBY PLII MOVIE

≥ DOLBY PLII MUSIC

≥ S.SRD

Selecting sound mode

1

Press [SOUND]: to select a sound mode.

Each time you press the button:
EQ:

Equalizer

SUBW LVL:

Subwoofer Level

C.FOCUS:

Center Focus (Only when “Surround layout
(Recommended)” mode is selected in “Speaker
layout” (B 8, Easy setup).)

2

While the selected mode is displayed, press [2, 1]8 to
make the settings.

Refer to the following for setting details of each sound effect.

EQ (Equalizer)
You can select sound quality settings.
Each time you press [2, 1]8:

FLAT:

Cancel (no effect is added).

HEAVY:

Adds punch to rock.

CLEAR: Clarifies higher sounds.
SOFT:

For background music.

SUBW LVL (Subwoofer level)
You can adjust the amount of bass. The unit automatically selects
the most suitable setting according to the type of playback
source.
LEVEL 1

,# LEVEL 2 ,# LEVEL 3 ,# LEVEL 4

^-------------------------------------------------------------------J

≥ The setting you make is retained and recalled every time you

play the same type of source.

C.FOCUS (Center Focus)
(Effective when playing audio containing the center channel
sound or when DOLBY PLII (
B left) is selected.)
You can make the sound of the center speaker seem like it is
coming from within the TV.
ON

,------. OFF

Whisper-mode Surround

Adjusting the speaker level during playback

1

Press and hold [–CH SELECT]: to select the speaker.

While the speaker channel is displayed, press [–CH SELECT]:.

e.g.

L

# C# R# RS# LS# SW

^---------------------------------------------}

≥ You can adjust SW (Subwoofer) only if the disc includes a

subwoofer channel.

≥ When “S” appears, only the surround speaker channel can be

adjusted. Both surround speaker levels will be adjusted at the same
time.

2

While “C”, “RS”, “LS”, “SW” or “S” is selected

Press [3]8 (increase) or [4]8 (decrease) to adjust the
speaker level for each speaker.

C, RS, LS, SW, S: `6 dB to i6 dB

(L, R: Only the balance is adjustable.) (B below)

Adjusting the speaker balance during playback

1

Press and hold [–CH SELECT]: to select “L”
or “R”.

2

While “L” or “R” is selected

Press [2, 1]8 to adjust the speaker balance.

SC-XH50PPC_RQTX1326-P_eng.book Page 11 Thursday, February 10, 2011 9:05 AM

Advertising