Panasonic TQBJ0302 - Manuel (Page 36)

DISPLAY OPTION menu
Settings
36 -
E
NGLISH
DISPLAY OPTION menu
Navigating through the MENU ( Æ page 27),
select DISPLAY OPTION from the main menu
and then select the required item from the
sub-menu.
Set the selected item with◄►buttons. z
Remote control Control panel
ON-SCREEN DISPLAY
You can set the on-screen display.
Change setting Change setting
J
INPUT GUIDE
When you change the input method, the guidance
appears in the upper right corner of the screen. The
following display methods are available.
DETAILED
Display the input method by graphic.
The INPUT GUIDE will go out after
10 seconds without any operation.
OFF Turn off the guidance.
SIMPLE
Display the input method by text.
The INPUT GUIDE will go out after
5 seconds without any operation.
Remarks
If you select the computer terminals which have no z
signals while INPUT GUIDE is set to DETAILED,
the computer connection guidance will be displayed.
If you want to turn off the guidance, select SIMPLE
or OFF.
Q
Computer connection guidance
You can switch the signals which output from the
COMPUTER1/COMPUTER2 terminal by pressing
the following computer key commands.
Manufacturer
Image output
selection
command
Manufacturer
Image output
selection
command
Panasonic
NEC
+
DELL
EPSON
+
Acer
HP
SHARP
TOSHIBA
+
FUJITSU +
Apple
lenovo
SONY
+
Remarks
The key commands are depending on the z
manufacturers. Please refer to the instructions
which were provided with the computers for more
detailed information.
OSD DESIGN
J
You can change the background of the on-screen
menu (OSD).
TYPE1 Semi transparent black
TYPE2 Solid blue
TYPE3 Semi transparent dark blue
WARNING MESSAGE
J
You can choose to display or not to display the
warning massages.
ON Warning messages will be displayed
OFF No display
Note
When the z WARNING MESSAGE is set to OFF, use
the projector with utmost care due to the most of
warning messages will not be displayed.
CLOSED CAPTION SETTING
If the input signal contains closed captions, you can
turn on the feature and switch the channels.
CLOSED CAPTION
J
OFF Deactive
ON Active
MODE
J
CC1 - 4 Change the channels CC1 - 4
Remarks
VCR with TBC (Time Base Corrector) function is z
recommended for video cassette tapes.