Philips 32PFL7704D - Manuel (Page 18)

16
Set the sleeptimer
Sleeptimer switches the TV to standby after a pre-defi ned period of time.
You can always switch off your TV earlier or reset the sleeptimer
during the countdown.
Press SLEEP repeatedly to select a value from 0 to 180 minutes. For
example, if you select 90, the TV switches to standby in 90 minutes.
Tip
• To turn the sleeptimer off, select 0 minutes.
Use child control and rating locks
You can prevent your children from watching certain programs or
certain channels by locking the TV controls and by using ratings.
Set or change your PIN
1
Press MENU/EXIT on the remote control and select [Features]
> [Change PIN] .
2
Enter a 4-digit PIN on the number buttons of the remote
control.
•
If you have a PIN, enter your current PIN.
• If you do not have a PIN or if you have forgotten your PIN,
enter 0711 .
• You are asked to enter your new 4-digit PIN again.
3
Enter your PIN again to confi rm.
» A message appears to confi rm that your PIN has been
changed.
4
Press MENU/EXIT to exit.
Lock the TV
This section describes how to lock all channels on the TV. At the
specifi ed time, screen is blanked out and the audio is muted.
1
Ensure that the clock is set with the current time (see ‘Set the
clock’ on page 15 ) .
2
Press MENU/EXIT on the remote control and select [Features]
> [Child lock] > [Lock after] .
3
Enter your PIN .
4
Press to select [Timer] .
5
Press to select [On] and activate the [Lock after] feature.
Select [Off] to deactivate the feature.
Lock after
Timer
Time
TV menu Features
Off
On
Child lock
Timer
2
Select [Automatic] and press to confi rm your choice.
3
(Optional) Select the channel from which the TV reads the time.
• Press and to enter the menu for [Auto clock channel] .
• Press or to highlight a channel.
• Press to confi rm your choice.
4
(Optional) Select the time zone.
• Press and to enter the menu for [Time zone] .
• Press or to highlight the time zone.
• Press to confi rm your choice.
5
(Optional) Set daylight saving.
• Press and to enter the menu for [Daylight saving] .
• Press or to highlight [Automatic] or [Off] .
• Press to confi rm your choice.
6
Press MENU/EXIT to exit.
Set the time manually
1
Press MENU/EXIT on the remote control and select
[Installation] > [Clock] > [Auto clock mode] .
2
Select [Manual] , and press to confi rm your choice.
3
Press to select [Time] and then press to set the time.
Use the format HH:MM. Select [AM] / [PM] for morning or
afternoon.
4
Press OK to confi rm your choice.
5
Press and to enter the menu for [Day] .
6
Press or to select the day.
7
Press OK to confi rm your choice.
8
Press MENU/EXIT to exit.
Auto clock mode
Manual
Automatic
Clock
TV menu I Installation
Auto clock mode
Auto clock channel
Time zone
Daylight saving
Auto clock mode
Manual
Automatic
Clock
TV menu I Installation
Auto clock mode
Time
Day
EN