Troubleshooting, About the self diagnosis mode, Additional information – Pioneer PDP-60MXE20 Manuel d'utilisation

Page 20

Advertising
background image

16

En

English

ERROR MESSAGE

CAUTION

OUT OF RANGE

or

CAUTION

UNSUPPORTED SIGNAL

or

SIGNAL NG

WARNING

THERMAL ALERT

SHUT DOWN

WARNING

FAN FAILURE

SHUT DOWN

ERROR

INVALID KEY ENTRY

SHUT DOWN

REMEDY

¶ The current input signal is

not supported by the unit.

Check the Computer signal

compatibility table and

change the computer’s

output signal setting

appropriately.

¶ Turn off main power.
¶ Is ambient temperature

above 40 °C?

¶ Remove any objects

blocking the cooling vents

on the Plasma Display.

¶ Cooling fan has

malfunctioned.

Immediately turn off

power, remove power plug

from its outlet, and consult

a Pioneer service center or

your dealer.

¶ An invalid operation has

been attempted. Check

input signals, connections

and other settings.

¶ Turn off main power, wait

for 1 to 2 minutes, then try

turning power on again. If

problem persists, remove

power plug from its outlet

and consult a Pioneer

service center or your

dealer.

Troubleshooting

What may at first seem to be an malfunction, may be
remedied with a quick check.
Please check to see if a warning is displayed on the
screen. If displayed, refer to the table below and check
the mode. If there is no display check to see if the
problem is listed on page 17. The problem may also be
caused by something other than this unit so please also
check the other components being used such as a video
deck. If the problem can still not be solved please consult
the dealer where this unit was purchased.

About the self diagnosis mode

Messages appear on the bottom of this unit’s screen to
indicate operation or connection faults. After message
confirmation, check the condition of the unit.

Additional Information

Advertising
Ce manuel est liée aux produits suivants: