Connection panel (pdp-60mxe20), Part names and functions – Pioneer PDP-60MXE20 Manuel d'utilisation

Page 12

Advertising
background image

8

En

English

COMBINATION

IN

OUT

RS-232C

AUDIO AUDIO

INPUT1

AUDIO

OUTPUT

INPUT2

ANALOG RGB OUT

(D-Sub)

ANALOG RGB IN

(D-Sub)

INPUT1

DIGITAL RGB
(DVI-D)

INPUT2

0

4

3

2

1

5

8

9

67

=

-

Part Names and Functions

1

COMBINATION IN/OUT
Never connect any component to these
connectors without first consulting your Pioneer
installation technician.
These connectors are used for Plasma Display setup
adjustments.

2

SPEAKER (R) terminal
For connection of an external right speaker.
Connect a speaker that has an impedance of 6

Ω.

3

SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 6

Ω.

4

RS-232C
Never connect any component to this connector
without first consulting your Pioneer installation
technician.
This connector is used for Plasma Display setup
adjustments.

5

AUDIO (OUTPUT) (Stereo mini jack)
Use to output the audio of the selected source
component connected to this unit to an AV amplifier
or similar component.

Note: No sound is produced from the AUDIO (OUTPUT) jack
when the MAIN POWER switch is set to OFF or ON (standby).

6

AUDIO (INPUT1) (Stereo mini jack)
Use to obtain sound when INPUT1 is selected.
Connect the audio output jack of components
connected to INPUT1 to this unit.

Connection panel (PDP-60MXE20)

The connection panel is provided with two video input
terminals and one video output terminal. Audio input/
output and speaker output terminals are also provided.

7

AUDIO (INPUT2) (Stereo mini jack)
Use to obtain sound when INPUT2 is selected.
Connect the audio output jack of components
connected to INPUT2 to this unit.

8

ANALOG RGB OUT (INPUT1) (mini D-sub 15 pin)
Use the ANALOG RGB OUT (INPUT1) terminal to
output the video signal to an external monitor or other
component.

Note: The video signal will not be output from the ANALOG
RGB OUT (INPUT1) terminal when the main power of this

unit is off or in standby mode.

9

ANALOG RGB IN (INPUT1) (mini D-sub 15 pin)
For connection of a personal computer (PC) or similar
component. Make sure that the connection made
corresponds to the format of the signal output from
the connected component.

0

DIGITAL RGB (INPUT2) (DVI-D jack)
Use to connect a computer.

-

AC IN
Use to connect the supplied power cord to an AC
outlet.

=

MAIN POWER switch
Use to switch the main power of the unit on and off.

Advertising
Ce manuel est liée aux produits suivants: