Installing additional video boards – Panasonic AW-PB605P Manuel d'utilisation

Page 4

background image


Installing additional video boards

(The installation work must be performed by your dealer without fail.)

The multi-function controller AW-RP605 comes with four slots for installing additional video
By adding the AW-PB605 video boards, up to five pan-tilt head systems can be controlled.

1. Remove the two screws and take off the blank panel.

2. Align the AW-PB605 video board with the guides, and insert it.

Push it in all the way.

3. Attach the board securely using the two screws.

Before adding a board to the multi-function controller


Set the power switches of all components to the OFF position, and disconnect the
power cords from the power outlets.


Release the static carried in the body of the person to perform the installation.
Installation can be performed more safely if an anti-static wrist strap is worn.
Touching the board without first releasing this static may cause malfunctioning.


Do not allow the metal part of the board come in contact with any other metal parts.


Refer to the Operating Instructions of the AW-RP605 Multi-Function Controller for
further details on how to connect this board.