Playing other sources, Choosing the input signal, Selecting the multichannel analog inputs – Pioneer VSX-518 Manuel d'utilisation
Page 30: Listening to your system 05
Listening to your system
05
30
En
Playing other sources
1
Turn on the power of the playback
component.
2
Turn on the power of the receiver.
3
Select the source you want to playback.
Use the
MULTI CONTROL
buttons (
INPUT
SELECTOR
).
4
Start playback of the component you
selected in step 1.
Choosing the input signal
• Default setting:
AUTO
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
1
1
Press
RECEIVER
on the remote control.
2
Press SIGNAL SEL (
SIGNAL SELECT)
to
select the input signal corresponding to the
source component.
Each press cycles through the following:
•
AUTO
– This automatically switches to
DIGITAL
if a digital source is detected,
otherwise it remains on
ANALOG
.
•
ANALOG
– Selects the analog inputs.
•
DIGITAL
– Selects the digital input.
When set to
DIGITAL
or
AUTO
,
2
DIGITAL
lights when a Dolby Digital signal is input, and
DTS
lights when a DTS signal is input.
Selecting the multichannel
analog inputs
If you have connected a decoder or a DVD
player with multichannel analog outputs to this
receiver (page 10), you must select the analog
multichannel inputs for surround sound.
2
•
Press
DVD 5.1
(
SHIFT
+
TV CTRL
) on the
remote control or DVD 5.1 on the front panel.
To cancel playback from the multichannel
inputs, use the
INPUT SELECTOR
buttons to
select a different input signal.
Note
1 • This receiver can only playback Dolby Digital, PCM (32 kHz to 96 kHz), DTS and WMA9 Pro digital signal formats. With other
digital signal formats, set to
ANALOG
.
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make
the proper digital connections (page 9) and set the signal input to
DIGITAL
.
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
2 During playback from the multichannel inputs, you can’t use any of the sound features/modes and only the volume and
channel levels can be set.
VSX_518_KU.book 30 ページ ２００８年５月１５日 木曜日 午後６時３１分