Sending documents via lan, Internet fax ledger size document transmission – Panasonic DP-3010 Manuel d'utilisation

Page 130

Advertising
background image

Sending Documents via LAN

130

Internet Fax Ledger Size Document Transmission

To send with reduction, follow the steps below.

Repeat steps 1 to 5, except in step 4, set the "Ledger Email Transmit" setting to "OFF" position.

When the Select Mode "Ledger Email Transmit" setting is set to the "OFF" position, the transmission
reduction is according to the setting of Fax Parameter No. 141 (LAN XMT Reduction). (See the Table
below)

NOTE

1. Factory default setting for Fax Parameter No. 141 (LAN XMT Reduction) is "Invalid".

4

Make sure that the setting is

and press

.

Dial by any combination of the following methods:

• Manual Email Addressing, press

after each station is entered. (Up to

70 stations)

• Address Book Email Addressing.

(Up to 200 stations)

Ex:

5

The document(s) is stored into memory with a file number.
The machine then connects to the LAN and transmits the Ledger size
document(s).
(After the document(s) are sent, the "Ledger Email Transmit" Select Mode will
automatically return to the preset position (ON))

Ledger Email Transmit = ON

:

Transmits actual document size (without reduction).

Ledger Email Transmit = OFF

:

Reduces LEDGER size document to B4 size or to A4/Letter
before transmission. (According to the Fax Parameter No. 141
(LAN XMT Reduction) setting, see Table below)

Document Size

Document Size Transmission

Ledger Email Transmit = ON

Ledger Email Transmit = OFF

Fax Parameter No. 141
(LAN XMT Reduction)
set to "Invalid"

Fax Parameter No. 141
(LAN XMT Reduction)
set to "Valid"

LEDGER

LEDGER

B4

A4/Letter

B4

B4

B4

A4/Letter

A4/Letter

A4/Letter

A4/Letter

A4/Letter

ON

OK

OK

PANASONIC

Memory Transmit STN(s):001
TO: PANASONIC
[email protected]

PANASONIC

QUALITY DEPT

Advertising
Ce manuel est liée aux produits suivants: