Panasonic DP-3010 - Manuel (Page 110)

Pre Installation Information
110
For the total system to work properly via LAN, certain information and additional parameters must be set.
Please contact your network administrator for the required information and connection to the LAN.
Important: Make a copy of this page and ask the Network Administrator to complete the required
information. After its returned, transfer the information to the back side of the front cover for future reference
and troubleshooting.
NOTE 1. Items in Bold, depict information obtained from you Network Administrator.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP and POP Server Names (items 7 and 10 above).
If the DNS Server is not available, change the 27/26*(DNS server address) of General Settings
to "No" (
, Input ID
Code, .). Then the machine will prompt you to enter
the IP Address of the SMTP and POP Servers.
3. If required, the MAC Address of your machine can be obtained from the 2nd page of the
General Settings List printout, by pressing
, Input ID Code,
* Certain Parameter Numbers may differ between the DP-2310/3010 and DP-3510/3520/4510/
4520/6010/6020 series. If you encounter two Parameter Numbers separated by a "/" and an
asterisk ("*"), the first number corresponds to (DP-2310/3010) and the second number
corresponds to (DP-3510/3520/4510/4520/6010/6020).
User Information
Company Name
Address
Dept.
City
State Zip Code
Tel. No. Fax No.
Internet Parameters (See page 122 )
(1) IP Address:
(2) Subnet Mask:
(3) Default Gateway IP Address:
(4) Primary DNS IP Address:
(5) Secondry DNS IP Address:
(6) Email Address:
(7) SMTP Server IP Name :
or *SMTP Server IP Address:
(8) SMTP Auth Name :
(9) SMTP Auth Password :
(10) POP Server Name:
or *POP Server IP Address:
(11) POP User Name:
(12) POP Password:
(13) LDAP Server Name:
or LDAP Server IP Address
(14) LDAP User Name:
(15) LDAP Password:
(16) LDAP Search Base:
(17) Host Name:
(18) Default Subject:
(19) Default Domain:
(20) Selectable Domains:
1. 6.
2. 7.
3. 8.
4. 9.
5. 10.
(21) Remote Password:
(22) Relay XMT Password:
(23) Manager’s Email Address:
(24) Insert Email Text:
(25) Relay Domains (Domains Authorized for Relay Transmission):
1.
6.
2. 7.
3. 8.
4. 9.
5. 10.
(26) Community Name (1):
(27) Community Name (2):
(28) Device Name:
(29) Device Location:
FUNCTION GENERAL SETTINGS 04 Key Operator Mode 09/04* Key Operator Mode
OK 27/26* DNS Server Address
FUNCTION GENERAL SETTINGS 04 Key Operator Mode 09/04* Key Operator Mode
OK 31 Print General Settings 00/31* Print General Setting Start OK