Adjusting initial settings, Setting the clock, Switching the warning tone – Pioneer DEH-P760MP Manuel d'utilisation

Page 42: Switching the auxiliary setting, Initial settings

Advertising
background image

Adjusting initial settings

1

Initial settings lets you perform initial set up of

different settings for this unit.

1 Function display

Shows the function status.

1 Press SOURCE and hold until the unit

turns off.

2 Press FUNCTION and hold until the

clock appears in the display.

3 Press FUNCTION to select one of the in-

itial settings.

Press FUNCTION repeatedly to switch be-

tween the following settings:

ClockWarning (warning tone)AUX (aux-

iliary input)Dimmer (dimmer)Brightness

(brightness)REAR SP (rear output and sub-

woofer controller)Telephone (telephone

muting/attenuation)Ever Scroll (ever scroll)

Use the following instructions to operate each

particular setting.

# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down FUNCTION until the unit turns off.

Setting the clock

Use these instructions to set the clock.

1 Press FUNCTION to select clock.

Press FUNCTION repeatedly until clock ap-

pears in the display.

2 Press c or d to select the segment of

the clock display you wish to set.

Pressing c or d will select one segment of the

clock display:

HourMinute

As you select segments of the clock display

the segment selected will blink.

3 Press a or b to set the clock.

Pressing a will increase the selected hour or

minute. Pressing b will decrease the selected

hour or minute.

Switching the warning tone

If the front panel is not detached from the

head unit within five seconds of turning off the

ignition, a warning tone will sound. You can

turn off the warning tone.

1 Press FUNCTION to select Warning.

Press FUNCTION repeatedly until Warning

appears in the display.

2 Press a or b to turn Warning on or off.

Pressing a or b will turn Warning on or off

and that status will be displayed (e.g.,

Warning :ON).

Switching the auxiliary setting

It is possible to use auxiliary equipment with

this unit. Activate the auxiliary setting when

using auxiliary equipment connected to this

unit.

Initial Settings

En

42

Section

09

Advertising