Ex) 35, Setting the sound focus equalizer, Sfeq) 35 – Pioneer DEH-P760MP Manuel d'utilisation

Page 35: Introduction of audio adjustments, Compensating for equalizer curves (eq-ex), Setting the sound focus equalizer (sfeq), Audio adjustments

Advertising
background image

Introduction of audio

adjustments

1

1 Audio display

Shows the audio adjustments status.

% Press AUDIO to display the audio func-

tion names.

Press AUDIO repeatedly to switch between

the following audio functions:

Fad (balance adjustment)EQ (equalizer

curve adjustment)Bass (bass and treble

level adjustment)Loud (loudness)

Sub-W1 (subwoofer on/off setting)/NonFad

(non fading output on/off setting)Sub-W2

(subwoofer setting)/NonFad (non fading out-

put setting)HPF (high pass filter)SLA

(source level adjustment)ASL (automatic

sound levelizer)

# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to
Bass.
# When the subwoofer controller setting is only
PREOUT:FULL, you cannot switch to Sub-W1.
(Refer to page 43.)
# You can select the Sub-W2 only when sub-
woofer output is turned on in the Sub-W1.
# When the subwoofer controller setting is only
PREOUT:FULL, you can switch to the non fading
output on/off setting. (Refer to page 43.)
# You can select the non fading output setting
only when non fading output is turned on in the
non fading output on/off setting.
# When selecting the FM tuner as the source,
you cannot switch to SLA.

# To return to the display of each source, press
BAND.

Note

If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Compensating for

equalizer curves (EQ-EX)

The EQ-EX function smoothes the effects of

each equalizer curve. Furthermore, you can

adjust bass and treble for each source when

CUSTOM curve is selected.

! If SFEQ has been previously selected, press

EQ-EX and hold to switch to EQ-EX and

EQ-EX indicator appears in the display.

% Press EQ-EX to turn EQ-EX on.

EQ-EX ON appears in the display. EQ-EX is

now on.

# To turn EQ-EX off, press EQ-EX.

Setting the sound focus

equalizer (SFEQ)

Clarifying the sound image of vocals and in-

struments allows the simple staging of a nat-

ural, pleasant sound environment. Even

greater listening enjoyment will be obtained if

seating positions are chosen carefully. FRT1

boosts the treble on the front output and the

bass on the rear output. FRT2 boosts the treble

and the bass on the front output and the bass

on the rear output. (The bass boost is the

same for both front and rear.) For both FRT1

and FRT2, H setting provides a more pro-

nounced effect than L setting.

Audio Adjustments

En

35

English

Section

08

Advertising