Remote specifications – Panasonic BT-LH1500P Manuel d'utilisation

Page 10

Advertising
background image

10

_ GPI hard specification
8 inputs (refer to D-SUB 9-pin terminal)

_ ON/OFF operation
Each terminal of REMOTE operates its assigned function accord-
ing to the setting with GND (Pin 5) shorted (ON) or opened (OFF).

_ How to assign the function to each terminal
The assignment to each terminal can be freely executed by
the On Screen Menu.
(Refer to “How To Use On Screen Menu”.)

Contents

GPI 1–GPI 4

GND

GPI 5–GPI 8

Pin No.

Pin 1–Pin 4

Pin 5

Pin 6–Pin 9

[REMOTE CONFIG]

>GPI1 UNDEF

GPI2 UNDEF

GPI3 UNDEF

GPI4 UNDEF

GPI5 UNDEF

GPI6 UNDEF

GPI7 UNDEF

GPI8 UNDEF

REMOTE CONFIG menu

GPI1

GPI5

MARKER 1

GPI1

GPI5

MARKER 1

1

2

3

4

5

6

7

8

9

REMOTE Specifications

_ Priority order of each function
• When MARKER 1 and MARKER 2 are simultaneously turned

ON, the priority is given to MARKER 1.

• 4:3/13:9/14:9 MARKER is displayed only when 16:9 is dis-

played. 95%/93%/88%/80% MARKER is automatically
changed in size according to 4:3 and 16:9 display.

• When MARKER HALF and MARKER BLACK are simulta-

neously turned ON, the priority is given to BLACK.

• In case same setting is assigned to a plurality of terminals,

ON operation continues until all terminals turn OFF. (Level
operation terminal only)

Ex.) Operation with GPI1 and GPI5 set to MARKER 1:

• In case of edge operation terminal, the priority is given to the

terminal turned ON later.

• In case the operation is impossible, REMOTE terminal will

not operate. (Refer to the example below.)
1) 4:3/13:9/14:9 MARKER display in 4:3 display.
2) HD ZOOM selection in case of a signal other than 1080I,

1035I, 720P signal.

3) SD aspect selection in case of HD.
4) INPUT OP selection when option unit is not installed.

*

1)

Operating conditions
Level operation: It operates only while GPI terminal is shorted to

GND.

Edge operation: It operates at edge of the fall when shorted to

GND.

*

2)

MARKER displayed by PRESET 1 and PRESET 2 is the one se-

lected by the menu for MARKER setting. (It is set by [MARKER]-
[GPI]PRESET 1 and PRESET 2 in the menu.)

*

3)

MARKER HALF and MARKER BLACK are effective only when

4:3/13:9/14:9 MARKER is displayed by using MARKER 1 and
MARKER 2.

(For the detail, refer to the “Description of MARKER.”)

All initial
states are
undefined
(UNDEF).

Function

Undefined (terminal assignment
not defined)

ON/OFF of marker selected by
PRESET1*

2)

ON/OFF of marker selected by
PRESET2*

2)

Background of marker being
displayed is set to HALF.

Background of marker being
displayed is set to BLACK.

Input system is changed to A.

Input system is changed to B.

Input system is changed to S.

Input system is changed to
OPTION.

Display change in SD,
16:9 (ON)/4:3 (OFF)

Display change in HD (1080I,
1035I, 720P), 4:3 (ON) enlarged/
16:9 (OFF)

Brightness of backlight is set to
minimum.

[List of Assigning Functions]

Assignment items

UNDEF

MARKER1 ON/OFF

MARKER2 ON/OFF

MARKER HALF

MARKER BLACK

INPUT SEL. A

INPUT SEL. B

INPUT SEL. S

INPUT SEL. OP

SD ASPECT

HD ZOOM

BACKLIGHT OFF

Operating
conditions*

1)

––––

Level operation

Level operation

Level operation

Level operation

Edge operation

Edge operation

Edge operation

Edge operation

Level operation

Level operation

Level operation

Advertising
Ce manuel est liée aux produits suivants: