Controls and their functions, Front view, Rear view – Panasonic BT-LH1500P Manuel d'utilisation

Page 5: Control and their functions

Advertising
background image

5

Front View

!

@

#

$

%

POWER

A

B

INPUT SELECT

S

OPTION

MENU/

EXIT

BLUE
ONLY

PHASE

CHROMA

BRIGHT

CONTRAST

M

HV

DELAY

ENTER

MENU

qS

1

2

3

4

5
6

7 8

9

qR

qS

7, 8, 9 to qR are options.

Rear View

Control and Their Functions

! Power switch

This is the main power switch.
With power ON, the upper LED (green) of the switch is
lighted.

@ Input select button

This is the signal input select button.
The input line of the button pressed is selected, then the

upper LED (green) is lighted.

A:

Line-A (composite input)

B:

Line-B (composite input)

S:

S-Video (S-video input)

OPTION: Option unit

# Menu select button

Used for menu display, adjustment and setting.

MENU/EXIT: Push when displaying a menu and getting out

of the menu.

:

Push when moving the cursor up/down or se-
lecting an item.

ENTER:

Push when getting into a downward menu.

$ BLUE ONLY/HV DELAY button

BLUE ONLY: With the button pushed, picture quality can

be adjusted by color lever.
When it is pushed again, the mode returns
to normal display.

HV DELAY: SYNC, blanking, and burst flag can be ob-

served.
Normal, H-Delay, V-delay and HV-Delay are
repeatedly displayed each time when
pushed. It doesn’t work when HD ZOOM is
used.

% Picture adjusting knob

(Hue/chroma/brightness/contrast)
Adjustable with the knob pushed and popped out, and re-

turned to preset value with it pushed in.

When set to a value other than the standard preset value,

the upper LED (amber) of adjusting knob is lighted.

1 LINE-A connector

This is the composite input connector A (BNC). (With
through-out type)

2 LINE-B connector

This is the composite input connector B (BNC). (With
though-out type)

3 S-video input connector

This is the S-video signal input connector. (With though-
out type)

4 REMOTE terminal

This is the REMOTE terminal (9-pin D-Sub).

5 SIGNAL GND terminal

This is the signal GND terminal.

6 AC power input socket

This is the AC power socket. Connect the attached power
cord. (Slip-off preventive fittings attached)

7 HD-SDI connector

This is the HD-SDI input connector (BNC). (With active
through-out type) [In use of optional HD SDI INPUT UNIT
(BT-YA300P)]

8 SDI connector

This is the SDI input connector (BNC). (With active through-
out type) [In use of optional SDI INPUT UNIT (BT-YA200P)]

9qR COMPONENT/RGB connector

This is the analog component/RGB input connector (BNC).
(With through-out type)
Also provided with external sync connector. [In use of op-
tional COMPONENT/RGB INPUT UNIT (BT-YA100P)]

qS VESA mount

!

!

Advertising
Ce manuel est liée aux produits suivants: