Kuppersbusch USA IKD 12250.0 - Manuel (Page 12)

12 GB
Activated charcoal filter (Recirculation version)
REPLACING THE ACTIVATED CHARCOAL FILTER
• This filter is not washable and cannot be regen-
erated, and must be replaced approximately every
four months of operation, or more frequently with
heavy usage.
• Remove the metal grease filters.
• Remove the saturated activated carbon filter by
releasing the fixing hooks.
• Fit the new filter by hooking it into its seating.
• Replace the metal grease filters.
Lighting
LIGHT REPLACEMENT
• 20 W halogen light.
• Remove the 2 Screws fixing the Lighting sup-
port, and pull it out of from the Hood.
• Extract the Lamp from the Support.
• Replace with another of the same type, making
sure that the two pins are properly inserted in the
lamp holder socket holes.
• Replace the Support, fixing it in place with the
two Screws removed as above.
FUSE REPLACEMENT
Fuse: model 5x20 5A time-delay
• Remove the filters.
• Remove the Screws fixing the fuseholder box.
• Open the fuseholder (bayonet fixing).
• Replace the fuse with another of the same type.
• Replace the fuseholder box and the filters.