Cabinet dimensions product dimensions, Venting requirements, For the most efficient and quiet operation – KITCHENAID 48 Manuel d'utilisation

Page 3

Advertising
background image

3

Cabinet dimensions

Product dimensions

92-1/2"
(235 cm)
min.
111-1/2"
(283.2 cm)
max.
ceiling to
floor

Venting requirements

The size of the vent should be uniform.

Use no more than three 90° elbows.

Make sure there is a minimum of 24" (61 cm) of straight

vent between the elbows if more than one elbow is used.

Do Not install two elbows together.

The length of vent system and number of elbows should

be kept to a minimum to provide efficient performance.

The vent system must have a damper. If roof or wall cap

has a damper, Do Not use damper supplied with the
range hood.

Use duct tape to seal all joints in the vent system.

Use caulking to seal exterior wall or roof opening around

the cap.

Determine which venting method is best for your
application and follow “Preparation” under ”Installation
steps“ on Page 5.

For the most efficient and
quiet operation:

Vent system must terminate to the outside.

Do not terminate the vent system in an attic or other
enclosed area.

Do not use 4 inch (10.2 cm) laundry-type wall caps.

Use metal vent only. Rigid metal vent is recommended. Do
not use plastic or metal foil vent.

30" hood 29-15/16" (76 cm),
36" hood 35-3/8" (89.9 cm),
48" hood 47-1/4" (120 cm)
overall width

23" (58.4 cm) min. -
42" (106.7) max.
overall chimney
height

22" (58.9 cm)
lower
chimney
height

1" (2.5 cm) min. -
20" (50.8 cm) max.
upper chimney height

9-1/2" (24.1 cm)
canopy height

19-1/4"

(48.9 cm)

overall depth

5-7/8"

(14.9 cm)

10-7/8"

(27.6 cm)

19" (48.3 cm)*

13" (33 cm)

cabinet

depth

34-5/8"
(87.9 cm)
min.

18" (45.7 cm)
min. clearance
upper cabinet to
countertop

* If the canopy hood is installed higher than

24" (61 cm) above the cooking surface, the
middle bracket must be installed at the
bottom point of the upper chimney sleeve.

** If the canopy hood is mounted higher than

24" (61 cm) above cooking surface, depending
on ceiling height, upper chimney may need to
be cut.

36" (91.4 cm)
base cabinet
height

30" hood 30" (76 cm),
36" hood 35-7/16" (90 cm)
48" hood 47-5/16" (120.2 cm)
min. cabinet opening widths

24" (61 cm) min.
bottom of canopy to
cooking surface**

Advertising