Installation requirements, Tools and parts – KITCHENAID KUDE60FVPA Manuel d'utilisation

Page 3

Advertising
background image

Tools and Parts

Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.

All Installations

Tools needed:

*Must be the proper size to connect your household wiring

to 16-gauge wiring in dishwasher

Other useful items you may need:

Parts supplied:

Make sure all these parts are included in the literature package.

Parts needed:

4 #10 x 1/2" wood screws (if installing custom front panels)

Wire stripper

Small

tubing cutter

Electric drill
with 1/2”, 3/4”
and 1 1/2” hole
saw bits

Pliers

UL listed or CSA
approved twist-on
wire connectors*

5/8” open-end
wrench

Small level

Utility knife

Phillips
screwdriver

Measuring tape
or ruler

10” adjustable wrench
that opens to
1.18” (2.9 cm)

Flat-blade
screwdriver

5/16” and 1/4”
nut drivers or
hex sockets

If installing custom front panels,
Torx T15 screwdriver

INSTALLATION REQUIREMENTS

90° Elbow fitting with 3/8”
N.P.T. external threads (the
other end must fit your water
supply line)

Teflon

®

tape or pipe

joint compound

Drain hose

2 - Drain hose clamps
(1 large and 1 small)

2 - #10 x 1/2”
Phillips-head
screws

Green

Silver

Copper tubing (3/8”

O.D. suggested) or
flexible braided
water supply line

For Direct Wire:

use UL listed or
CSA approved
strain relief to
fit 7/8” (2.2 cm)
hole

See “Electrical Requirements” section

For Power Supply
Cord: use UL
listed power
supply cord kit
marked for use
with dishwasher

Flashlight

Bath towel

Wood block

Shallow pan

3

1 1/2”–2”
(38.1–5.0 cm)
Screw-typ e
clamps (3 max)

Masking or
duct tape

2 #8x1-3/8” Torx

®

T15 screws

4 #10x3/8” hex-head screws

Bottom sound pad (located
in lower rack)

Moisture barrier tape

Other parts you may also need:

NOTE: Parts available for purchase in plumbing supply stores.
Check local codes. Check existing electrical supply. See
“Electrical Requirements” section. It is recommended that
electrical connections be made by a licensed electrical installer.

In addition, for first-time installations

Tools needed:

Parts needed:

Additional parts supplied with top-venting models only:

Additional parts supplied with certain models only:

Make sure all these parts are included in the literature package.

If parts are not included, call 1-800-422-1230.

® Teflon is a registered trademark of E.I. Du Pont de Nemours and Company.

†® TORX is a registered trademark of Acument Intellectual Properties, LLC.

Advertising
Ce manuel est liée aux produits suivants: