KITCHENAID Bottom-Mount Refrigerator - Manuel (Page 16)

16
Drop-in Door Trim
The door trim may be removed for easier cleaning.
To remove the trim:
1. Remove all items from the shelf.
2. Pull straight up on each end of the trim.
To replace the trim:
1. Locate each end of the trim piece above the trim
pocket opening.
2. Push the trim straight down until it stops.
Door Accessories
Door Bins (on some models)
The door bins are removable for easy cleaning and
adjusting.
1. To remove the bin, simply lift the bin up and pull
straight out.
2. To replace the bin, slide it in above the desired
support and push down until it stops.
Can Rack (on some models)
To remove the rack:
1. Remove all items from the rack.
2. Lift the rack up.
3. Pull the rack straight out.
To replace the rack:
1. Hold the back of the rack above the desired guide.
2. Push the back of the rack back and down until it stops.
Utility Bin
The Utility Bin makes it easier to store smaller items such
as single-serving packages or items that might need extra
protection anywhere inside your refrigerator section. You
could also use the Utility Bin in the freezer to store ice.
Wine Rack
(on some models)
To install the wine rack:
Slide the wine rack between the refrigerator shelf and the
wall of the refrigerator compartment.
To remove the wine rack:
Pull the wine rack straight out from between the
refrigerator shelf and the wall of the compartment.