Sanyo HT28745 - Manuel (Page 7)

7
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
HDTV BACK— JACKS LOCATIONS AND FUNCTIONS
➀
Component Video Input (COMPO 2)—Connect
digital video equipment to the Y, Pb, Pr and Video 2
Audio L/R jacks. These jacks will automatically detect
the type of signal being received (HDTV, EDTV, or
SDTV). (See page 9.)
➁
S-Video (Video 1 and 2) Input—To enhance video
detail, use the S-Video (Video 1/2) jacks instead of the
Video jacks, if available on your external equipment.
(S-Video connections will override connections to the
Video 1/2 input jacks.) (See page 10.)
➂
Digital Audio Output—Use an Optical Audio cable to
connect the Digital Audio Output to an advanced
stereo home theater system equipped with Dolby
®
Digital 5.1. (See page 9.)
➃
Analog Audio Out (L/R) Jacks—Connect external
audio equipment here. (See page 10.)
➄
Component Video Input (COMPO 3)—Connect
digital video equipment to the Y, Pb, Pr and Audio 3
(L/R) jacks. These jacks will automatically detect the
type of signal being received (HDTV, EDTV, or SDTV).
(See page 9.)
➅
Audio/Video Input (VIDEO1/VIDEO2)—Connect
standard video equipment here. (See page 10.)
NOTE: S-Video1/2 connections override the AV1/2
video composite connections.
➆
Analog Antenna Input (UHF/VHF/CATV)—Connect
an RF antenna, cable, or satellite receiver to this ter-
minal as shown on page 5.
➇
Digital Antenna Input—Connect an RF antenna to
this terminal as shown on page 5.
➈
Service Terminal—For technical use only.
Y
P
b
P r
COMPONENT VIDEO INPUT VIDEO AUDIO INPUT
VIDEO 2 VIDEO 1
COMPO 3
(MONO)
COMPO 2 AUDIO 3
S-VIDEO
VIDEO
AUDIO (MONO)
ANALOG
AUDIO
OUTPUT
L
R
LL
R
UHF/VHF/CATV
SERVICE
DIGITAL
AUDIO
OUTPUT
DIGITAL
ANTENNA IN
➄ ➅ ➆ ➇ ➈
➀ ➁ ➂
➃
Audio Cables—Provides analog left /right
audio for your external equipment connec-
tions.
Component: Y, Pb, Pr—Use these cables
to connect your component equipment.
This connection provides the best picture,
but does not include sound. (Cable colors:
Y = green, Pb = blue, and Pr = red.)
Composite Audio/Video (RCA type)—
Use these cables for standard analog
audio/video connections. Normally cables
are color coded: Yellow for Video, White for
(L) Audio, and Red for (R) Audio.
Coaxial Cable—Used to connect a signal to
your digital or Analog RF Antenna In terminal.
Optical Digital Audio—Use this cable to
connect the DTV ‘s digital audio output to a
multi-channel audio receiver.
S-Video Cable—This cable provide separate
luminance and color signals for higher reso-
lution and better picture quality. Use this
cable instead of the regular composite video
cable (RCA type), when available.
NOTE: None of these cables are supplied with this DTV.
GLOSSARY OF CABLES