Sanyo HT28745 - Manuel (Page 10)

10
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
ANALOG A/V CONNECTIONS
USING THE ANALOG VIDEO JACKS
TO CONNECT A VCR (OR OTHER
ANALOG DEVICE)
Switch off DTV and external equipment before connect-
ing cables.
(Cables are not supplied.)
NOTE: Composite jacks
offer only 480i (SDTV)
resolution.
Y
P b
P r
COMPONENT VIDEO INPUT VIDEO AUDIO INPUT
VIDEO 2 VIDEO 1
COMPO 3
(MONO)
COMPO 2 AUDIO 3
S-VIDEO
VIDEO
AUDIO (MONO)
ANALOG
AUDIO
OUTPUT
L
R
L
34
R-AUDIO-L
R-AUDIO-L VIDEO
VIDEO
VHF/UHF
TO TV
FROM ANT.
RF
CHANNEL
IN
OUT
IN
OUT
S-VIDEO OUT
L
R
Back View of VCR
DTV AV
INPUT Jacks
1 Connect VCR’s Audio Video Out to the DTV’s Video
In jacks.
NOTE: For Mono VCR (Single Audio Jack), connect
VCR Audio Out to DTV Audio (L) Input.
2 2 Optional
Connect VCR’s S-Video Out to the DTV’s S-Video In
Jack.
NOTE: S-Video jacks connection override Video
jacks connection.
3 Press POWER to turn on the DTV, then turn on
external equipment.
4 Press the INPUT to select VIDEO 1 or VIDEO 2 to
view the VCR program.
What you will need
for connections:
Audio / Video Cable – 1
S-Video Cable – 1
S-Video
Jack
2 2
1
1
4 5 6
2 3
POWER
INPUT
Remote Control
4
3
CONNECTING ANALOG AUDIO OUT
JACKS TO A STEREO AMPLIFIER
Switch off DTV and external equipment before connect-
ing cables.
(Cables are not supplied.)
Y
P b
P r
COMPONENT VIDEO
COMPO 3
(MONO)
ANALOG
AUDIO
OUTPUT
L
R
Stereo Amplifier
Back View of DTV
What you will need for
connections:
Audio Cable – 1
1 Connect the DTV Audio Out (R/L) to the Stereo
Amplifier In (R/L).
2 Press POWER to turn on the DTV, then turn on
external equipment.
NOTES:
Do not connect external speakers directly to the DTV.
When TV Speaker is in the ON mode, sound will be
reproduced through your DTV and stereo amplifier.
When TV Speaker is in the OFF mode, sound will be
reproduced only through the stereo amplifier. (See page
20 to set DTV speakers.)
1
■
Press INPUT key after connecting cables to access the VIDEO 1 or
VIDEO 2 input. There is NO need to tune to a blank channel.
■
VIDEO 1 and VIDEO 2 jacks have identical functions. Any com-
patible analog video device can be connected to either set of jacks.
■
“No Signal” will appear randomly on the screen when no signal is
detected at the VIDEO 1 or VIDEO 2 inputs.
■
Position your DTV at least 2 feet from stereo speakers. The
magnets in the speakers may affect the picture quality.
1
4 5 6
2 3
POWER
INPUT
Remote Control
2