Sony ICD-35 - Manuel (Page 25)

Advanced Operations
25 GB
Notes
• You cannot set the alarm if you have not set the clock or there is no message in
the selected file (the unit will not enter the alarm setting mode when you press
MENU in Step 2 on page 22).
• If you try to set the alarm to play back a message at a previously set time on
another message, “PRE SET” will be displayed, preventing new settings.
• If the alarm time comes while another message is being played back with an
alarm, the playback stops and the new message will be played back.
• If the alarm time comes during recording, alarm will sound for 10 seconds
after the recording is finished and playback begins. “ ∆” will flash when the
alarm time comes.
• If more than one alarm time comes during recording, only the first message
will be played back.
• If the alarm time comes when the unit is in the menu mode, alarm will sound
and the menu mode will be cancelled.
• If you erase the message you set the alarm to play back, the alarm setting will
be cancelled.
• You can adjust the playback volume with the VOL control.
• If the alarm time comes during erasing, alarm will sound for 10 seconds after
the erasing is finished and playback begins.
• Alarm setting will not be cancelled when the alarm playback finishes. To
cancel alarm setting, see below.
To cancel the alarm setting or change the alarm time
1 Select the message you set the alarm to play back, and press MENU.
“ALARM On” will be displayed.
2 Press (pPLAY/STOP to flash “On”.
3 To cancel the alarm setting: Press – = or ++ to flash “OFF” and
press (pPLAY/STOP.
To change the alarm date and time: Press (pPLAY/STOP. When
the alarm date is displayed, follow the Steps 3 to 5 on pages 23 and 24
to change the alarm date and time.
4 Press MENU to exit the menu mode.