Sony Model STR-DE435 - Manuel (Page 25)

25 GB
Receiver Operations Other Operations
Indexing Preset Stations and
Programme Sources
You can enter a name of up to 8 characters for preset
stations (station index) and programme sources. These
index names (for example, “VHS”) appear in the
receiver's display when a station or programme source
is selected. This function is useful for distinguishing
components of the same kind. It is also handy for
identifying components connected to jacks meant for
another type of component, for example, a second CD
player connected to the MD/TAPE jacks.
Notes
• Not more than one name can be entered for each preset
station or programme source.
• You cannot index FM RDS stations or components
connected to the 5.1 CH/DVD jacks.
1
To index a preset station.
Tune to the preset station you want to name.
To index a programme source.
Select the programme source (component) to be
named, then go to Step 2.
2
Press NAME.
The cursor blinks in the display.
3 Use + or – to select the character you desire.
4
Press MENU < or > to move the cursor into
position for the next character or previous
character.
5
Repeat Steps 3 and 4 to enter up to 8 characters.
6
Press ENTER to store the names.
If you make a mistake
Press MENU < or > repeatedly so that the character you
want to change blinks in the display, then use +
or – to select the desired character.
To assign index names to other stations
Repeat Steps 2 to 4.
To clear programme source name
Press NAME and then press the same programme source
button. Press ENTER to delete the name (except TUNER).
Recording
This receiver makes it easy to record to and from the
components connected to the receiver. You don’t have
to connect playback and recording components
directly: once you select a programme source on the
receiver, you can record and edit as you normally
would using the controls on each component.
Before you begin, make sure you’ve connected all
components properly.
ç: Audio signal flow
c: Video signal flow
Recording on a MiniDisc or audio tape
You can record on a MiniDisc or cassette tape using the
receiver. See the instruction manual of your MD deck
or tape deck if you need help.
1
Press one of the function buttons to select the
programme source.
2
Set the component to be ready for playing.
For example, insert a CD into the CD player.
3
Insert a blank disc or tape into the recording deck
and adjust the recording level, if necessary.
4 Start recording on the recording deck and then
start playing the component.
Function buttons
Recording component
(MD deck, Tape deck,
VCR) Playback component
(programme source)
(continued)