SVAT Electronics 2.4 GHz Wireless B/W Security System - Manuel (Page 8)

6
Setting Up
Before you make the connection:
• Always make sure the unit ON/OFF switch is in the OFF position.
• Set the channel switches on the back of the camera and monitor to the same channel.
• If you wish to wall mount the camera, it is recommended that the receiver reception be
tested before fixing in place. Have one person hold the camera against the wall in the
selected mounting area while another checks reception on the monitor. If interference or
other problems are present, refer to the Troubleshooting section on page 15 of this manual.
You may need to select a different location in the room for mounting the camera.
Camera
Monitor
PDF created with FinePrint pdfFactory trial version www.pdffactory.com