SVAT Electronics 2.4 GHz Wireless B/W Security System - Manuel (Page 16)

Auto-Sequence Function for Multiple Location Monitoring
Note 1: The monitor will auto detect the receiving channels, and display them in sequence. When
only one channel dip switch is in the ON position, the monitor will receive the channel
continuously, without regard to the position of the 5th dip switch. If more than one dip
switch remains on, the auto-sequence function will continue on those channels.
Note 2: When none of the dip switches are in the ON position, the monitor will automatically set the
receiving channel to Channel 1.
Example:
Using the auto-sequence function:
If you have two wireless camera and their channels are set on
CHANNEL 1 and CHANNEL 3, and you wish to monitor the
two channels in sequence, you must slide up the first and third
dip switches to the ON position (see the diagram on the right).
If you wish these two channels to be alternated at eight-second
intervals, slide the DIP 5 switch to the ON position. Leave it in
the lower position for four-second channel change intervals.
14
Stopping the auto-sequence function:
To stop the auto-sequence function and lock on one channel, leave the dip switch for the channel you
want to receive in the ON position. Slide the others to the lower position.
PDF created with FinePrint pdfFactory trial version www.pdffactory.com