Sony AVD-S500ES - Manuel (Page 71)

Se
tting
s an
d A
d
ju
stme
nts
71 US
Setting restrictions
Size setup has some restrictions. Some settings
are changed automatically.
If “FRONT” is set to “SMALL”
“CENTER,” “SURROUND,” and
“SURROUND BACK” must be set to either
“SMALL” or “NONE.”
If “SURROUND” is set to either “LARGE” or
“SMALL”
“SURROUND BACK” must be set to the same
setting or “NONE.”
If “SUBWOOFER” is set to “NONE”
“FRONT” must be set to “LARGE.”
Notes
• When you select an item, the sound cuts off for a
moment.
• Depending on the settings, subwoofer output may be
excessive.
Specifying the surround speaker
position and height
If you select anything other than “NONE” in
“SURROUND,” specify the size, position, and
height of the surround speakers.
These parameters are not available when
“SURROUND” is set to “NONE.”
Tip
Surround speaker position and height is
designed specifically for CINEMA STUDIO
EX mode.
SURROUND LARGE (BEHIND, LOW),
LARGE (BEHIND, HIGH),
LARGE (SIDE, LOW),
LARGE (SIDE, HIGH),
SMALL (BEHIND, LOW),
SMALL (BEHIND, HIGH),
SMALL (SIDE, LOW),
SMALL (SIDE, HIGH):
Specify the size, position, and height
to implement the Digital Cinema
Surround modes in the sound field
(page 46) properly. For details, see
“Specifying the surround position
and height” as below.
NONE: Select this if no surround
speaker is used.
SURROUND
BACK LARGE: Normally select this.
SMALL: Select this if small
speakers are used for the surround
back speaker.
NONE: Select this if no surround
back speaker is used.
SUBWOOFER YES: Select this if a subwoofer is
used.
NONE: Select this if no subwoofer
is used.
BEHIND (LOW): Select this if the surround
speakers are located in section
B
and D.
BEHIND (HIGH): Select this if the surround
speakers are located in section
B
and C.
SIDE (LOW): Select this if the surround
speakers are located in section
A
and D.
SIDE (HIGH): Select this if the surround
speakers are located in section
A
and C.
90
20
45
A A
B B
Position diagram
60
30
C C
D D
Height diagram
continued