Sony AVD-S500ES - Manuel (Page 62)

62 US
You can use VCRs or other units connected to
the VIDEO1, TV/SAT, or VIDEO2 jacks. Refer
to the operation manual supplied with the other
unit for further information on its operation.
Press the button “VIDEO1,” “VIDEO2,” or
“TV/SAT” you want to use.
When you press the button you want to use, the
mode of the receiver changes and the currently
selected unit name appears in the front panel
display.
Tip
You can also select the mode using FUNCTION –/+ on
the receiver. Each time you press FUNCTION –/+, the
mode of the receiver changes in the following
sequence.
DVD t VIDEO1 t VIDEO2 t TV/SAT t
TUNER t DVD…
Presetting Radio Stations
You can preset 20 stations for FM and 10
stations for AM. Before tuning, make sure to
turn down the volume to minimum.
1
Press BAND repeatedly until the band
you want appears in the front panel
display.
Each time you press BAND, the band
toggles between AM and FM.
The BAND button is available only the
DVD function is selected on the remote.
2
Press and hold TUNING + or –, then
release.
Scanning stops when the receiver tunes in a
station. “TUNED” and “ST” (for stereo
program) appear in the front panel display.
3
Press AMP MENU.
4
Press X or x repeatedly until
“MEMORY” appears in the front panel
display.
Using Other Units
VIDEO1
TV/SAT
VIDEO2
Enjoying the Radio
" / 1
BAND
ENTER X / x
AMP MENU
TUNING
–/+ PRESET
–/+
DIGITAL EX
PRO LOGIC DVD SACD HYBRID
ALL 1DISCS TITLE TRACK CHAPTER INDEX H TUNED M MONO ST S
SHUFFLE
REPEAT1
PROGRAM dB PCM DSD NEO:6
kHz DTS-ES
MHz MPEG-2
96/24
AAC FM AM
MEMORY
ANGLE CD MP3 VIDEO CD PBC NTSC PROGRESSIVE